The ProxPro proximity card reader's weatherproof design and
architecturally attractive enclosure allows easy mounting indoors
or out. The ProxPro Reader is ideal for applications requiring
a larger read range.
Ideal for medium-range applications.
Available with Wiegand, Serial (RS-232/RS-422) or Clock-and-Data
interface.
Sealed for indoor or outdoor use.
Optional glass mount kit available for mounting the reader behind
glass.
ProxPro II 5455 125 kHz Wall Switch Proximity Reader
Data sheet
Installation Guide
Two-piece reader design allows for easy installation.
Available with a Wiegand or Clock-and-Data interface.
Provides high reliability, consistent read range and low power
consumption.
Features include multicolor LED and internal control or host
control of the LED and beeper.
Mounts directly on metal with minimal impact on the read range
performance. Optional kit enables mounting behind glass.
Compare features of the ProxPro II to the original ProxPro reader
MaxiProx 5375 125 kHz Long Range Proximity Reader
Data sheet
Installation Guide
HID's MaxiProx® Reader is ideal for installations incorporating
parking control and long read range applications. The MaxiProx
reader packages all the electronics in one rugged, attractive
and easy-to-install housing.
Long read range distance (up to 6' with ProxPass).
Autotune allows read range to be maintained within four inches
of metal.
Wiegand, Clock-and-Data, RS-232, RS-422, and RS-485 output modes
are configurable.
"Parking hold" feature ensures accurate detection
of vehicles in parking lanes.
Power requirements: 12 or 24 VDC (configurable) .
Current requirements: 200mA avg / 700 mA peak at 12VDC; 260mA
avg / 1.2A peak at 24 VDC.
Dimensions: 12.0" x 12.0" x 1.0" (30.5 x 30.5
x 2.54 cm)
EntryProx 125 kHz Stand-Alone Proximity Reader
Data sheet
Installation Guide
HID's EntryProx™ stand-alone reader truly stands alone in what
it delivers. Compatible with all HID proximity cards and keytags,
EntryProx™ provides single-door proximity access control and is
ideal for unique applications. The reader, designed to be weatherand
vandal-resistant, can be mounted indoors or outdoors up to 10 feet
away from the control unit using the detachable antenna module.
The versatile, attractive unit is easily modified to become an on-line
reader by switching to Wiegand output mode, allowing it to connect
to any OEM controller and provide card and PIN output.
RP40 multiCLASS Reader Multi-Technology Prox and iCLASS Reader
Data sheet
Installation Guide
The RP40 is a multi-technology card reader designed for customers
upgrading their current card system from HID Prox to iCLASS® credentials.
With the RP40 reader, the customer has the ability to transition
to smart cards over time while incorporating the use of multiple
card technologies within a single building or across multiple
facilities.
Unlike contactless smart card serial number readers, with the
RP40 multiCLASS™ reader, you get enhanced security through mutual
authentication and data encryption.